Tiles are an expensive investment to make. Therefore, to cut them, you need an excellent wet tile saw. Without an excellent machine to assist you in doing the job, it is nearly impossible for both a professional mason and an amateur to cut out the perfect piece of tile.
However, due to the vast array of options available in the market, the task of choosing the right wet tile saw can be difficult. To make this job more comfortable for you, we have listed down the five best wet tile saw for you along with a buying guide.
After going through this article, you will know the ins and outs of what makes a suitable tile saw. So keep reading to learn more!
5 Best Wet Tile Saw Reviews
We have carefully selected our top 5 picks after extensive research. You will find comprehensive reviews of each along with their Pros and Cons mentioned below:
|SKIL 3540-02 7-Inch Wet Tile Saw||Check Price|
|Chicago Pneumatics Industrial Tile Saw||Check Price|
|DEWALT Wet Tile Saw with Stand||Check Price|
|SKIL 3550-02 7-Inch Wet Tile Saw||Check Price|
|PORTER-CABLE Wet Tile Saw||Check Price|
1. SKIL 3540-02 7-Inch Wet Tile Saw
Manufactured by the renowned brand SKIL, this wet tile saw is a piece of great equipment that you can use to cut and shape up your tiles. It comes in color red and has the dimension 18 x 14.5 x 7.75 inches in terms of its length, width, and height, respectively.
Before you purchase this machine, you must remember that it is a corded electric saw. So while using it, you need to be near a source of electricity to power the machine. Overall weighs 21.9 pounds, which isn’t that tough to bear if you are sturdy and fit.
Its top is resistant to corrosion and made up of stainless steel. It can accommodate tiles up to 12 x 12-inch comfortably. Moreover, to ensure miter cuts, the saw contains an adjustable rip fence along with a miter gauge. In addition to this, you can cut any tile as long as it is made up of stone or masonry.
The machine comes with a water reservoir of its own, which can cool down its blade when it gets too hot from cutting tiles. Therefore, the edge won’t face corrosion, and the amount of dust and debris will be minimized. Moreover, its bevel can cut tiles from 0 to 45 degrees.
- Comes with a stainless steel tabletop
- Resists corrosion
- Capable of making miter cuts using a miter gauge
- Contains a water reservoir to cool off the blade
- Dust and debris production is minimum.
- It is corded
- Makes a lot of noise
2. Chicago Pneumatics Industrial Tile Saw
The second pick on our list is manufactured by Chicago Electric Professionals. This one is also a corded tile saw that runs on electricity. It is made up of metal and therefore weighs very high. Its weight is almost 100.3 pounds, which is extremely heavy. Therefore, managing it requires a sturdy operator.
The tile saw is of the wet type and includes a built-in 3 gallon per minute water pump. As a result, the blade does not get too hot when the water from the pump cools down. Moreover, the pump is removable and can be cleaned easily. Not only this, the saw is capable of cutting tiles that are 18 inches long.
However, make sure that the tile you are cutting does not measure more than 12 inches diagonally. This saw is capable of making deep cuts up to 3-1/8″, and therefore is quite efficient in cutting tiles smoothly. Besides, it contains a structured frame made of steel that is covered by an extremely precise bar system, which ensures smooth operation.
The saw contains a column made of cast-alloy along with a cutting head to minimize the amount of vibration. This makes the tile cutting experience smoother. It is capable of supplying a maximum power of 2.5 HP. Lastly, it contains a mighty dual capacitor motor.
- Contains a water pump to cool off the hot blade
- Cutting head is adjustable.
- Has a capacity of 2.5 HP
- Reduced vibration
- Motor contains a highly efficient dual capacitor.
- Extremely heavy
- Corded which reduces portability
3. DEWALT Wet Tile Saw with Stand
DEWALT is a world-famous brand for its outstanding quality equipment manufactured for different purposes. Keeping up with their standards, they have brought forth their wet tile saw that comes in a bundle along with a stand. The bundle will include a 10-inch damp tile saw; a tile saw frame and other useful accessories.
The best thing about this tile saw is that it comes with a submersible pump, a water pan aside, and a rear water tray, which creates a complete machine capable of cooling off the blade every time it becomes too hot, cutting the tiles. This also prevents excess dirt and debris from forming.
The overall tool weighs about 69lbs, which is good enough to handle by a fit person. Its peak horsepower is 1.5 HP. And it runs on a voltage of 120 volts. Not only this, it contains a cutline indicator along with stainless steel rollers that are capable of supporting stable and precise cuts.
The machine can make cuts within the range of 1/32 inch over 18-inch cuts. And the max depth it provides is 3 1/8”. Its bevel can make cuts at 45 degrees angles that are very helpful when you want to cut a tile in a curved shape. Besides, the machine is equipped with a compact saw frame, which increases its portability.
- Comes in a bundle of a wet tile saw and a diamond blade
- Machine has a compact framing supporting portability.
- Submersible water pump included
- Bevel can cut at angles of 45 degrees.
- Blade can provide chip free cuttings.
- Tile cart is inconvenient to use
- Inconsistent packaging
4. SKIL 3550-02 7-Inch Wet Tile Saw
Our fourth pick is another excellent wet tile saw from SKIL having all the specifications necessary to cut tiles properly. It has the perfect dimensions of 22 x 18 x 8.5 inches, making it extremely convenient to use. However, it is corded and runs on electricity. So make sure to have a power outlet nearby.
The speed of this machine’s blade is 3600 RPM, which is up to the mark for making quick and efficient cuts. Moreover, the equipment only weighs 24 pounds, which makes holding and carrying it convenient. Apart from this, this tool comes with an aluminum tabletop, which is highly resistant to rust.
The best feature of this machine is its hydro lock water containment system. It can keep the water closer to the blade, which in turn minimizes the clean-up period. As a result, the blade does not get overheated while cutting, and the amount of dirt and debris produced is reduced.
Another great thing about this tool is it can support tiles having dimensions up to 18 x 18-inches. And if you are interested in making miter cuts, you can do that too using its miter gauge that comes with an adjustable rip fence. Last but not least, its bevel is capable of cutting tiles at 0, 22.5, and 45 degrees, which increases your flexibility.
- Bevel is capable of cutting at three different angles
- Contains a hydro lock system
- Aluminum table top is exceptionally durable and resistant to rust
- Fast speed
- Diamond blade to provide precise cuts
- Tile cannot be cut from below with it
- Gets wet too fast
5. PORTER-CABLE Wet Tile Saw
The last pick on our list is no less than the previous picks in terms of its features and uniqueness. If you prefer a lightweight wet tile saw that would give you maximum ease, then this one from PORTER-CABLE will be perfect for you.
It has a compact size with the dimensions of 26.9 x 22.7 x 8.9 inches, making it very convenient to use.
You must plug it into a power source before use since it is corded and runs on electricity. The machine weighs only 32 pounds, which makes it extremely portable and easy to carry. To start off on its best features, it contains an onboard miter square that can easily line up miter cuts.
You can also make repeatable rip cuts with its miter square. On top of this, it is also equipped with a roll cage that facilitates its transportation process. Besides, a splash guard is added to prevent water from splashing into the tool operator. This enables you to properly monitor the cuts you are making and thus achieve perfect results.
The machine features a stainless steel fixed deck that is capable of holding up excess water, in addition to any job site abuse. In addition, you will get a drain plug that can quickly drain out water to a bucket keeping the chances of creating a mess at bay.
And lastly, you can cut up a variety of tiles made of ceramic, porcelain, or stone with it.
- Easy to use
- Capable of cutting ceramic, porcelain and stone tiles
- Contains a water splash guard
- Features a drain plug to drain out water
- RPM is lower than some of its competitors
- Causes too much vibration
What to Look for Before You Buy?
A review is incomplete without a buying guide. It tells you the specific features you need to look for before purchasing a product. Since a tile saw isn’t cheap, you must be well aware of the specifications that a good tile saw should have.
But don’t worry, to help you with this, we have prepared our very own list of features to look for that can guide you through this process. It has been provided below:
Level of Precision
Precision is the most important factor to consider when it comes to buying a wet tile saw. The main task of this machine is to cut tiles accurately in shape. Therefore, you must check the depth of the cuts made by the machine along with its blade type to be ascertained about its level of precision.
Usually, the most convenient wet tile saws are those that are overhead or tabletop. They provide great durability and precision. And the higher the price of a saw, the better is its accuracy level.
Sharpness and Quality of Blade
The blade is what does the job of cutting the tiles. So it must be sharp and durable in order for it to make deep cuts. Even if your tile saw is expensive and loaded with fancy features, if its blade is not good, then all your money will go to waste. Therefore, you must check whether the blade is of good quality.
The blade should be able to glide through ceramic, stone, or porcelain tiles without much hassle. It should also be capable of making deep and smooth cuts without leaving sharp edges. These are some tell-tale signs that you can look for to evaluate the quality of the blade.
There are several additional features that are available in modern tile saws. These features help to make the task easier for you by providing suitable amenities. And if you are a newbie or a beginner, then it can be very helpful to have these features in the saw you are getting to do complete the job successfully.
Even if you are a DIY enthusiast, having these features will increase your flexibility of work and provide you with better output. For example, the angle cuts made by the bevel are an important characteristic to look for.
Read more, Best Dremel Tool
In addition to this, you should also search for extra horsepower, ease of access, smooth operation, and a special locking mechanism in the saw you are getting.
Another important aspect of a wet tile saw is its water producing technology. The pump should be efficient and protected against splashes with a guard. If it makes lacks a splash guard and makes too much splash, then the cuts you are making will end up being imperfect.
Even if something you have liked contains all the features above, you won’t be able to purchase it if it is tight on your budget. Therefore, price is an important criterion to look at while buying something. Look into the price options that fall within your budget and also contains the specifications mentioned above.
How to Use It?
Using a wet tile saw can be tricky, especially if you are doing it for the first time. However, to make things easier for you, we have provided guidelines on how to use one:
First and foremost, you have to lock the tile into the saw table. To do this, you have to use the locking mechanism provided on the saw that contains a lever. By pulling the lever, you can lock and unlock the tile.
After completing this step, you have to measure the tile using the measuring guides on the saw table. Use the lock plate to secure the cut that you are going to make on the tile. Make sure that while you are measuring, the numbers might get concealed by water or debris. So keep wiping it off from time to time.
After properly locking the tile in place, you are ready to cut it. Now you have to lower the blade guard and turn on the tile saw. Then move the tile downward onto the saw table, inward and finally backward, making it run through the saw blade. Keep repeating this motion by applying equivalent pressure from all sides.
Once you have obtained the desired cut of the tile, you can stop moving the tile. In this way, you will be able to cut a tile with a tile saw safely.
Some Useful Safety Tips
Since a tile saw is a big machine, you need to adopt some safety measures before beginning to work with it. The most useful safety precautions to follow while using this tool are mentioned below:
- Make sure to wear safety gears like goggles and gloves when you are operating this machine. The goggles will prevent any dirt or debris from flying into your eyes. And the gloves will add an extra layer of protection to your hands and fingers to keep it safe from the blades.
- Carefully read the instruction manual of the saw to understand its workload capacity. Do not overload it with excess work as it might damage the tool and make it malfunction.
- Take proper measurements before making the cut since one wrong move will spoil the entire piece of tile.
- It is important to cover your nose and mouth with a face mask to prevent the debris from getting into your lungs. You might feel a sneezing or coughing sensation if you are not careful with this step.
- Ensure that the sharpness of the blade is adequate enough to make proper deep cuts into the tile.
Frequently Asked Questions
What size wet tile saw do I need?
It depends on the size of the tile you want to cut. The smaller saws come with a blade of 4 to 7 inches. They usually use a water pan below the blade to cool it off and are therefore cheaper. However, if you plan on cutting bigger tiles, then a larger tile saw with 7 to 10 inches to blade and a water pump will be more suitable for you.
How do I know if my diamond blade is dull?
There are some easy to spot signs that can tell you if your diamond blade has gone dull. For example, its cutting speed will reduce, and it won’t provide clean cuts like it used to. The blade will also look too smooth and glazed over. And some of its parts might look worn down.
What is the best blade to cut ceramic tile?
The most suitable blade to do this job is a diamond blade. This type of blades will not contain any notches or serration and will have a diamond tip.
Can you cut tile without a wet saw?
Yes, it is possible to do so. However, if you use a manual saw, then the job will become extremely tedious and long. A lot of dust and debris will also be produced which might be an inconvenience for people having dust allergy.
How long do diamond tile blades last?
The lowest quality diamond blade under suitable conditions can work for 12 hours at a stretch. However, the best ones are capable of relentlessly cutting for 120 hours.
Now that we have reached the end of this article, we hope that you will now find it easier to make your decision about which one is the best wet tile saw. By following this review, you will surely make a good purchase and won’t be left disappointed.